Original Listing Description

Antique 1920s GE Novalux Form 18B Victorian Bronze Chicago Street Lantern DISPLAY STAND IS *NOT* INCLUDED (IRON FLOOR GRATE & LOG SUPPORT)Based on dimensions this is believed to be a GE Novalux Form 18B CAT NO 246132Large Ornamental Lantern Without Refractor. Dimensions slightly differ from the catalog schematic photo.The spire, for example, is 7 1/2" tall.The catalog prices don't include the 24lb bronze base accessory this listing does have which slips over a 5 1/2" post and attachesto the octagonal lantern with 4 bolts (2 original brass bolts and 4 replacement bolts are provided) Magnificent to marvel at. Step back in time to the 1920s and appreciate true GE design lost to modern times.In total, lantern + bronze base stand 49" tall with a max diameter of the lantern being ~22".The octagonal lantern features original glass - eight clear dimpled glass panelswhich are in excellent condition, no cracks. The glass is dimpled on one side, smooth on the other.I quote the GE literature:"The ribs are extended in a graceful fashion and the top canopy terminates in a slender pinnacle.These Novalux units are in architectural accord with the old standards of lantern design INSTALLATION: The base will install over a 5 1/2" lamp post and will set down 8.5" inches untilthe lantern rests on top of the pole.CONDITION ISSUES:* One of the eight missing spikes on top has been found. It's a short 6" piece that attaches by screw near the hinge. I've ordered a brass replacement screw and will install it.* The weather seal on the inside top lid is missing and hence not weather tight as it was originally. Weather seal for the glass panes is worn.* This lamp is not electrified nor is a socket present. The inside does have a very nice original porcelain, not a socket.* You will receive two original brass screws that attach the bronze base to the lantern. I will ship 4 hardened allen-wrench black screws and the two orig. brass screws. When installing, the hardened screws might be best. I was able to align all 4 holes and install the 4 bolts. If you have trouble, you may need to rotate the base until you find the position where all 4 holes align.* The top is made of aluminum? metal alloy, not bronze, and was weathered. Steel wool was used to clean/smoothen the top.* GLASS CLIPS. Inside there are 16 clips holding the 8 panels of glass. 4 clips are new. I've made the 4 copper clip replacements. 12 clips are original OVERALL given its age, the lantern is in excellent original condition SHIPPING Local pickup is preferred. I can ship domestically for $200 with the following agreement:The bronze base will be shipped separately. The lantern glass and lantern lid will be disassembledfor safe shipping. In total, two cartons, assembly required on your end. Please no international bidsfor this item.THE DISPLAY STAND IS *NOT* INCLUDED (IRON FLOOR GRATE & LOG SUPPORT) (Condition: Pre-Owned)

Note: This item has been sold and is no longer available. This page serves as a historical price reference for Lantern collectors and appraisers.